Located in Thornton, Serving Thornton and Surrounding Areas.
Rewiring Brighton houses means dealing with more age than most of the north metro. The blocks around Main Street and Bridge Street go back to the early 1900s, when Brighton was a farm and rail town and the sugar factory was the biggest employer around. Some of those homes still have original wiring inside the plaster. Modelco Electric has done this work since 1993, from a shop just down the road in Thornton.
Out past the edge of town it is a different job. Farmhouses, pole barns, and shops on acreage, each with its own history of who wired what.
Plaster and lath walls, balloon framing, porcelain knobs in the attic. If that describes your house, knob and tube wiring replacement is the job, and it is worth doing before an insurer or a buyer's inspector forces the question. Knob and tube was never meant to be buried in insulation, and nearly every old Brighton house has had insulation blown in since. We fish new grounded cable through the open bays that balloon framing leaves, which keeps plaster damage small. Our residential rewiring on these homes usually goes floor by floor.
East of town toward Barr Lake and north toward the Weld County line, plenty of properties have a house, a shop, and a barn wired over fifty years by three different owners. Underground feeders to outbuildings are where we find the worst of it. Direct-buried cable that has cracked. Splices in a coffee can. A shop running a welder off a circuit meant for lights. Rewiring Brighton farm properties starts with tracing every feeder back to its source, and an electrical inspection maps what is out there before we price anything.
Older Brighton homes rarely stayed the size they started. A back porch became a bedroom. A garage became a family room. Each change got wired by whoever was handy, usually by tapping the nearest outlet. The result is one circuit feeding half the house and a breaker that trips every time the space heater kicks on. Rewiring Brighton homes like these is often partial: we rewire the overloaded runs and leave the newer circuits alone. That is electrical retrofitting in plain terms, and it costs a lot less than starting over.
Inside city limits, the City of Brighton issues the permit and sends the inspector. Properties in unincorporated Adams County go through the county, and Brighton's north end crosses into Weld County, which has its own office. We sort out which one applies, pull the permit, and schedule the inspections. When an old house still has a fuse box or a 60-amp service, we fold a new electrical panel into the same permit. While the panel is open, adding surge protection is cheap insurance for the new wiring and everything plugged into it.
It is a short run out Highway 7 or E-470 from our Thornton base, so Brighton is home turf, not a long haul. Modelco has been the same company since 1993, and owner Matt Moody has more than twenty years with his hands in panels and junction boxes. We are licensed and insured, and the five of us do the work ourselves, so the same faces show up from estimate to final inspection. If you looked up house rewiring near me from a house off Bridge Street, we can get out to you fast. Rewiring Brighton homes is close-to-home work for us.
Our Brighton trips also cover Henderson, Lochbuie, Commerce City, Fort Lupton, and the acreage around Barr Lake. Closer to our shop, we handle Thornton rewiring jobs in the 1950s ranches, and to the west we do the same work for Broomfield homeowners. People searching house rewiring near me anywhere along Highway 7 reach the same small crew.
Code does not force you to remove working knob and tube, but insurers and lenders often will. Many carriers will not write a new policy on a house with active knob and tube, and buyers in Brighton see it flagged on every inspection report. Replacement also gets you grounded outlets and GFCI protection, which the original system cannot provide.
Mostly, yes. Older balloon-framed houses have open stud bays from the basement to the attic, and we fish cable through them. Where we have to open plaster, we keep the cuts small and patch them. Expect some patching, not demolition.
Yes. Barns, shops, well houses, and outbuildings in unincorporated Adams County and southern Weld County are regular work for us. We replace failing buried feeders, add subpanels, and size circuits for welders, compressors, and stock tank heaters.
An electrical permit from whichever office covers your address. That is the City of Brighton inside city limits, Adams County for most unincorporated land, and Weld County for parts of the north end. We figure out which one applies and pull it.
A small bungalow can be done in a few working days. A two-story plaster house with an addition or two takes longer. We cut circuits over one at a time, so you keep power in most of the house through the job.
Sometimes. It can be one overloaded circuit, a failing breaker, or a sign the whole system is undersized. We test before we recommend anything. Plenty of these calls end with a repair and one new circuit, not a rewire.
We do, and in old Brighton houses it often happens alongside rewiring. A fuse box limits what you can add and tempts people to install bigger fuses than the wire can handle. Swapping it for a breaker panel is part of most knob and tube jobs.
By circuit count, house size, access, wall type, outbuildings, and whether the panel gets replaced. You get an itemized written quote after a walkthrough, with the permit, inspection, and patching included.
Call before the furnace and the space heaters start loading up old circuits for the season. We will look at the panel, the attic, the basement, and any outbuildings, then hand you a written quote for electrical rewiring services with the permit included. Rewiring Brighton houses before the cold sets in is easier on everyone. Request your estimate and we will call you back the same day.
We're based right here in Thornton, CO. That's our home base — but we also serve nearby areas throughout the region. If you're in one of these communities and looking for a reliable electrician in the Thornton, CO area, we're glad to talk through your project.